Introduction of Autoclave Aerated Concrete Equipment:
The Autoclave Aerated Concrete Equipment can follow raw materials classification. The craft characteristics of the quality, equipment, etc, adopt different crafts to produce. Generally speaking, water wears into the thick liquid material to add fly ash or the silicon sand, slay, put powdery lime, right amount cement, gypsum into and foam pharmaceutical, steady to steep pharmaceutical is it inject mould into in the frame to mix, is it foam solidification to rest ,cut various kinds of specification building block or panel, is it keep cauldron to steam to send into to maintain the car to steam ,maintained the concrete products which forms the porous light quality by the high-pressure vapor of high temperature.

Autoclave Aerated Concrete ploduction line -- Process:

1. The raw materials store in the material storehouse (or stores the pot ) after dealing with reservly such as the lime , cement , gypsum , sand (or fly ash ).

2. Aluminium powder or the aluminium lotion is through dealing with the reserve material for use.

3. Raw materials measure according to certain matching by electron balance measure , aluminium powder , water put into aluminium powder mixer is it is it suspend the liquid to make to mix after measuring.

4. The batching water (cold water or hot water pitcher hot water ) is measured by the electronic water balance .

5. Put into and pour among the mixers in certain order after , raw materials , aluminium powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould).

6. Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang from upset hoist upset 90o after the base body reaches certain intensity, the drawing of patterns is cut.

l          a. The base body carries on the side and cuts and mills the trough vertically at first.

l          b. Then carry on the vertical level to cut.

l          c. Cut horizontally finally.

l          d. Cut good base body is it raise to cauldron car go on one yard of shelves organize into groups to steam to transport to hang to drive a vehicle to load.

7. Organize into groups good base body is it keep cauldron is it is it raise to steam to go on to steam to enter to draw.

8. Is it raise products well produce after the cauldron breaking the board off with the fingers and thumb by the board breaking off with the fingers and thumb machine to steam.

9. Is it pile from finished product hoist or forklift to finished product field pile the buttress according to specification to carry.

10. Steaming and raising the car and side board and entering the next board of circulation and returning after , the finished product is unloaded, with upset hoist mould frame association that drawing of patterns get off , restore 90 Degrees return to pour mixer pour again after clearing up.

 If you are interested in the Autoclave Aerated Concrete Equipment by us, please Contact us or visit the website of the company for relevant prices and detailed technical parameters and specifications etc. HONGSEN HEAVY INDUSTRY GROUP. will assure you of our best service at all time!

The annual output 30,000 m3 annual 50,000 m3 aerated concrete streams and raises the production technological process

(1)     Various kinds of raw material stock the storehouse (2) Measure the batching (3) Raw material add water to mix and mix (4) The mould is prepared (5) Pour (6) Stop angrily and quietly (7) Drawing of patterns (8) The upset, level are cut, cuts vertically (9) Organized into groups and enter the cauldron (10) High-pressure maintenance of the high temperature (11) The finished product the cauldron (12) and examines the finished product (13) Packaging (14) One yard of buttresses storing (15) Dispatched from the factory

Don't hesitate to contact with us, if you interested in our products or get any questions in mind, we will assure you of our best service at all times. you can give us call by 0086-13213220053 or Skype me at cindylee55.  We shall be glad to got the chance to cooperate with you!

Contact person: cindy lee

Skype:cindylee55

Mobile Number:0086-13213220053

Application of Jaw Crusher:

Hongsen is a trusted and reliable brand for its high quality and good manufacturing. It specializes in producing Jaw Crusher which is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Each model has a large feed opening for its size and an ideal nip angle, giving smooth material flow, high reduction efficiency and high capacity. Their simple design conceals many advanced features that give easy operation, simple maintenance, long life and a low cost per ton.

The structure of Jaw Crusher:

The structure of Jaw Crusher includes Main Frame, Main Axle, Roller Bearings, Eccentric Shaft, Jaw Plates, Side Plates, Toggle Mechanism, Fly Wheels and Springs.

The Features of Jaw Crusher:

1. Jaw Crusher is of various types;

2. Jaw Crusher is suitable for crushing maximum, medium and minimum stones;

3. The operating principle of Jaw Crusher is easy to be operated;

4. The structure of Jaw Crusher is simple and it is easy to maintain;

Operating principle:

Jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

Specifications of Jaw Crusher

 

Model	Size of Feeder Opening (mm)	Max. Feeding Size (mm)	Capacity (t/h)	Motor Power (KW)	Overall Dimensions (mm)	Weight (t)
PE150×250	150×250	125	1-3	5.5	896×745×935	1.2
PE250×400	400×250	210	5-20	15	1430×1310×1340	2.2
PE400×600	600×400	350	15-50	37	1700×1732×1653	6.8
PE600×900	900×600	480	45-110	75	2290×2206×2370	17
PE900×1200	900×1200	750	90-220	110	3800×3166×3045	50
PE500×750	500×750	425	15-65	55	2035×1921×2000	12
PE750×1060	1060×750	630	105-195	110	2655×2302×3110	29
PEX250×750	750×250	210	15-30	37	1667×1545×1020	5
PEX250×1000	1000×250	210	15-50	37	1550×1964×1380	7
PEX250×1200	1200×250	210	20-60	37	2192×1900×1950	8.5

Don't hesitate to contact with us, if you interested in our products or get any questions in mind, we will assure you of our best service at all times. you can give us call by 0086-13213220053 or Skype me at cindylee55.  We shall be glad to got the chance to cooperate with you!

Contact person: cindy lee

Skype:cindylee55

Mobile Number:0086-13213220053

MSN:kid2411@hotmail.com

Introduction of Ball Mill :
Ball mill is an efficient tool for grinding many materials into fine powder. The Ball Mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material.

Application of Ball Mill:
The ball mill is a key equipment for regrinding. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Our ball mill can grind ore or other materials that can be grinded either by wet process or by dry process.

Ball Mill Working principle:
The ball mill is a skeleton pattern ball mill with horizontal cylindrical turning gear, drive by outer gear and two hoppers. The material goes to the first hopper after the spiraling by the quill shaft from the feeding equipment. The hopper has ladder sheathing or corrugated sheathing with steel balls inside, which will fall under the effect of centrifugal force by barrel turning to ram hard and grind material. After the kibbling in the first hopper, by monolayer partition panel, the material will enter the second hopper, which has plane scale board with steel ball inside to grind material. The powder material will be discharged from the grid plate to finish the grinding.

Features and benefits of Ball Mill:
This ball mill is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control ) and so on. The hollow axis adopts the cast steel and the lining can replace , the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scaleboard. This machine run steadily and works reliably.

Specifications of Ball Mill 

Model	Speed of bucket (r/min)	Weight of ball	Size of feed opening(mm)	size of outputting feed (mm)	Production (t/h)	Power (kw)	Weight (T)
Ф900×1800	38	1.5	≤20	0.075-0.89	0.65-2	18.5	3.6
Ф900×3000	38	2.7	≤20	0.075-0.89	1.1-3.5	22	4.6
Ф1200×2400	32	3.8	≤25	0.075-0.6	1.5-4.8	45	12.5
Ф1200×3000	32	5	≤25	0.075-0.4	1.6-5	45	12.8
Ф1200×4500	32	7	≤25	0.075-0.4	1.6-5.8	55	13.8
Ф1500×3000	27	8	≤25	0.075-0.4	2-5	90	17
Ф1500×4500	27	14	≤25	0.075-0.4	3-6	110	21
Ф1500×5700	27	15	≤25	0.075-0.4	3.5-6	132	24.7
Ф1830×3000	24	11	≤25	0.075-0.4	4-10	180	28
Ф1830×6400	24	23	≤25	0.075-0.4	6.5-15	210	34
Ф1830×7000	24	25	≤25	0.075-0.4	7.5-17	245	36
Ф2200×5500	21	30	≤25	0.075-0.4	10-22	370	48.5
Ф2200×6500	21	30	≤25	0.075-0.4	14-26	280	52.8
Ф2200×7500	21	33	≤25	0.075-0.4	16-29	475	56

Don't hesitate to contact with us, if you interested in our products or get any questions in mind, we will assure you of our best service at all times. you can give us call by 0086-13213220053 or Skype me at cindylee55.  We shall be glad to got the chance to cooperate with you!

Contact person: cindy lee

Skype:cindylee55

Mobile Number:0086-13213220053

Belt conveyer manufactured by HONGSEN HEAVY INDUSTRY GROUP. bears such merits as large convey quantity, simple structure, convenient maintenance and standard parts etc. The conveyors consist of standard parts, which are advanced and simple in structure, easy to maintain. Our vibrating equipment is adaptable for stationary and mobile crushing plants. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump materials, or packaged materials. According to different transferring equipment, the transfer system can be one independently or multi-conveyors or combined with other transfer equipments. The belt conveyor can be installed horizontally or aslope to meet the needs of different transfer lines.
The belt conveyors produced by SJLC can be operated in the temperature situation ranging from -20℃ to +40℃. The temperature of transferred material by this belt conveyor should be lower than 50℃.The types of the belt conveyors produced by SJLC are as follows:

1. Devided by Driving Method:

a. STD—Mechanical Drive：It’s driven by cycloidal pinwheel reducer (with outdoor motor ) and chain-drive mechanism.
b. STDJ Ⅱ Mechanical Drive Series .It adopts upside-down reducer and belt-drive mechanize.
c. STD-Electric Rotor Drive Series：It’s driven by electric rotor.

2. Divided by Installation Methods
a. Fixed Series：It’s directly installed on foundation.
b. SDY-Portable Series：It can be easily and freely moved and the capacity can be adjusted.

3. Divided by Structures:
The belt conveyors produced by SJLC have three different structures.
a. U-steel b. Frame　c. Truss

Belt conveyor Working principle:
The motor drives the driving rollers of the belt conveyor, and drives the roller by the strong belt advances. Materials are conveyed from the original place to the place where they are needed.

 If you are interested in the Belt conveyor by us, please Contact us or visit the website of the company for relevant prices and detailed technical parameters and specifications etc. HONGSEN HEAVY INDUSTRY GROUP. will assure you of our best service at all time!

Don't hesitate to contact with us, if you interested in our products or get any questions in mind, we will assure you of our best service at all times. you can give us call by 0086-13213220053 or Skype me at cindylee55.  We shall be glad to got the chance to cooperate with you!

Contact person: cindy lee

Skype:cindylee55

Mobile Number:0086-13213220053